HOLDEN COMMODORE V6 3.8LTR EFI

INTO

VB - VL COMMODORE.



V6 Conversions have developed a conversion kit to allow the instillation of the Commodore 3.8ltr V6 engine and T700 or T5 gearbox, from VN - VY, to  the VB - VL Commodore with optional air-conditioning and power steering.

To comply with Australian emission laws the engine must have been manufactured the same year or later than the vehicle. The engine must also have all of the emission components connected, including the catalytic converter. The engine must also be run on unleaded fuel or LPG.

In Australia an Engineers report is required after the conversion has been completed. Contact your local RTA office for a list of Engineers.

CONVERSION INFORMATION.

This is a very simple conversion with all components being an all bolt in. The front cross member supplied in our kit uses the Commodore engine mounts and power steering and non power steering. The gearbox cross member uses a VN gearbox rubber mount.

You will need to obtain the following components -

* The Commodore V6 engine complete with the main engine wiring harness, the ECM computer and memcal. Other accessories such as the map sensor, purge canister, air cleaner & ducting, air-conditioning compressor & power steering pump, engine pipes & catalytic converter, external fuel pump & damper.

The Series One engines have two crankshaft bolt patterns and starter motor types, the manual transmission type and the automatic transmission type. For this reason they are not interchangeable.

However, Series Two and later engines have the same crankshaft so they can be converted from automatic to manual by fitting a flywheel and changing the memcal. This only applies to VN and VP engines, VR and later engines have different computers and wiring looms for automatic and manual.

You can leave your original fuel tank in place by using an external EFI fuel pump and modifying the filler neck by way of a return line and restrictor so that it will only accept an UNLEADED nozzle or you can fit a complete fuel tank from the VN Commodore.

The V6 motor does not have an engine driven fan, you can use your original radiator and fit the fan and cowling from the VN - VY or a 16” Davies Craig or similar.

The wiring kit we have available covers from the VN - VY. It comes in 2 parts, the under bonnet loom with all the relays and fuses and the under dash loom which incorporates an engine trouble light. The wiring kit plugs into the original engine and gearbox loom leaving only 6 wires to be tapped into your vehicles original loom, which are - alternator light, oil light, temp light or gauge, ignition, starter & tacho.

Our speedo kit comes in 2 forms, an in line speed sensor that fits the T700 or T5 and your original cable to suit VN - VP, or an electronic speedo from VR - VY instillations.


KIT CONTENTS.

* K-Frame

* gearbox cross member

* speedo kit

* wiring kit

* fitting instructions

 

Kit price - $1,300.00 ( GST inclusive )



 

Optional Extra’s.

* EFI fuel pump - $240.00

* 16” thermo fan - $200.00

* Idler kit VN - VR - $150.00

*  “     “   VS - VY - $175.00  this is to be used if not running power steering.

* Body Control Simulator VR - VS - $325.00

*  “         “            “        VT - VY - $425.00

* VT - VY wiring looms are $25.00 extra on normal wiring looms.



If you have any further questions not covered in this information sheet please contact us for further information.

 

   ***************************************************************************************************************************

 

HOLDEN COMMODORE V8 5L EFI

INTO

VB - VL COMMODORE.



KIT CONTENTS.

* gearbox cross member

* speedo kit

* wiring kit

* fitting instructions


Kit price - $800.00 ( GST inclusive )


Optional Extra’s.

* EFI fuel pump - $240.00

* Body Control Simulator VR - VS - $325.00

*    “         “            “           VT - VY - $425.00

* VT  wiring looms are $25.00 extra on normal wiring looms.



If you have any further questions not covered in this information sheet please contact us for further information.

 

   **************************************************************************************************************************

 

 

HOLDEN COMMODORE V8 5.7LTR EFI

INTO

VB - VS COMMODORE.

 

 KIT CONTENTS.

* K-Frame

* Gearbox cross member

* Wiring kit

* BCM

* Header kit

* Engine mount kit

* Speedo kit

* Steering Universal ( VB to VK )

* Fitting Instructions


Kit price - $3,326.00 ( GST inclusive )


Optional Extra's.

* EFI fuel pump - $240.00

* Fuel Pump regulator $244.50



If you have any further questions not covered in this information sheet please contact us for further information.

 

***********************************************************************************************************************************

HOLDEN COMMODORE 3.6L VZ

TO

VB - VS.

 

KIT CONTENTS.

* K-Frame

* Gearbox crossmember

* Wiring Kit & BCM

* Header kit

* Speedo kit

* Pulley kit ( A/C & Alternator )

 

KIT PRICE:  $3,400.00  ( GST Inclusive )

 

If you have any further questions not covered in this information sheet please contact us for further information.